Strict Quality Control System

We strive to provide our customers with the best wood flooring in China.

Founded on the belief of introducing the global flooring market top quality “Made-in-China” flooring products. We specialize in design colors/styles suitable for world wide indoor design trends and export quality floors with 100% originality. At our company innovation meets excellence.

We have 4 departments globally including Headquarter in Shanghai, QC Team in Zhejiang, Customer service in Sydney Australia, and Oak Veneer Grading team in Dalian, to improve efficiency from the production untill the onsite installation.

Under the control of ISO9001, ISO14001 and ISO14025, from material to the final product, each piece is processed through 49 working procedures and each procedure is controlled strictly by certain producing data. Especially for the procedures of kiln dry skills, environmental climates and piece checking, which promise our floor with a stable and high quality.

Pcs by pcs checking

MC(moisture content) check. Before the KD board go into the T&G(Tongue and Groove) processing workshop, we will classify the KD boards according to the different MC level. This procedure promises all the classified KD boards is at the same MC level. At the same time, the two faces and four sides will be checked. Any defects board will be put away.

Twist surface check

Before T&G processing, the workers will check the surface and put away the defects board.

Thickness surface check after T&G

Processing defect check at the same time, classify the T&G board according to the natural color variation. Make the color in most uniform.
Sanding check before UV coating. Check the surface and thickness.
UV product line check, put away the defect UV coating product.
Final product color classified secondly. Make the final packed products color in most uniform .
Advanced kiln dry skills-key factor of final floor with a stable condition.

Experienced kiln dry skills

Drying the AD board according to the different places climate requirement. Making the MC more close to the local climate requirement.
Drying the AD board according to the different species. Different species need different way (such as; time, temperature , Moisture etc.) to dry.
Before further processing, the dried boards just after taking out from the kiln need a stress-relief period. Different species need different stress-relief time. Then the AD board turned into KD board. The stress-relief period is very important for the stability of the floor.

Test and record at QC center

We select the final products randomly form UV coating line for testing the impact resistance, wear resistance, hardness of surface, adhesion, scratch resistance, MC and dimensions. And then, we make a record for all the testing. If any item can’t meet the requirement, we will immediately inform certain workshop to improve.